Home / 4″ Blast Gate Observation Port (F/T) Flanged to Threaded

4″ Blast Gate Observation Port (F/T) Flanged to Threaded

Part# 4FTBGOP
Pipe Size – 4″ – Viewing Area – 3 3/8″ Diameter
A. 13 – 3/4″

B. 5 -5/8″
C. 5 -3/8″
D. 9″
E. 2 -7/8″
Size of bolts 5/8″
Flanged bolt hole circle 8 on 7 -1/2″ centers
Psig. Rating – 5

Clear
Description

This unit mounts to a mating flange on 3″ or 4″ pipe, while the viewing components are housed in a NPT threaded body half. The standard stainless steel slide arrangement in the blast gate gives added protection and life to the lens during operation, and allows maintenance to be performed with added safety during vessel down-time. Additional cooling can be obtained by adding a purge connection on the glass or vessel side of the blast gate housing. Three choices of glass are available for varying temperature exposures and viewing requirements. Fabrication in alternative materials is available upon request.

Part# 4FTBGOP
Pipe Size – 4″ – Viewing Area – 3 3/8″ Diameter
A. 13 – 3/4″

B. 5 -5/8″
C. 5 -3/8″
D. 9″
E. 2 -7/8″
Size of bolts 5/8″
Flanged bolt hole circle 8 on 7 -1/2″ centers
Psig. Rating – 5

Glass Option Code Number Thickness Max. Int. Temp. Max. Con. Temp.
Pyrex Clear (Borosilicate) Glass P 1/4” 554F 446F
Quartz Clear Glass Q 1/4” 2048F 1600F

NOTE: Temperature ratings apply only for the operating conditions of the glass. Ratings for housings vary on type of steel.

Data Sheets

Partners of Gageglass.net

boilersupplies-1
boilergasket-1
heat-exchanger-USA
tubebundle
helical-coil